Emergency Services Show

New products to see

Here you can find products that exhibitors will be bringing to the Show. You can sort by product name alphabetically or filter for specific product groups.
Loading
  • A&E Ambulance
    With a flexible layout bespoke to you, O&H has some of the most technically advanced A&E Ambulances on the market. We understand that an Ambulance is a working environment therefore our range of vehicles are designed to be spaceous, practical and efficient and are adaptable to the demanding requirements of the Emergency Services.
  • Sentinel (Heavyweight ROV)
    6 Wheel Independent Hub Drive ROV Capable of lifting up to 100KG Multiple terrain access due to strong motors and independent powered axles, which aid climbing stairs to an angle of 35 degrees. Mission time exceeding two hours. With easy to exchange internal batteries which can extend mission time indefinitely. Used extensively at the Didcot Power Station Collapse. This was one of the first vehicles to carry out search and reconnaissance missions under the standing structure after the collapse. Its tasks including making safe welding cylinders, and removing welding apparatus to ensure that there would be no further explosions during the demolition process. In the latter stages these ROV's were used to lay heavy demolition charges, and precisely position cutting charges that would ensure the correct and safe collapse of the structure. Easily integrates into other equipment such as CBRN and X-ray using a Can-Bus system
  • ANCHORA
    The ANCHORA is an anchor device designed by Lyon Equipment. Lyon Equipment Limited is a UK manufacturer of high quality products with our own in-house design and manufacturing team.
  • Archer (Lightweight ROV)
    An early version of Archer was used during the Search and Recon stage of the Didcot collapse (it was the first vehicle on the site proving the concept of the ability to gain access to a dangerous and radio susceptible area) . These small robots got right up to the collapse area taking Hi Res photos of the damage whilst looking for any casualties. Utilising ceramic cutters they bled down welding bottles that had been left full, to help prevent further explosions during the demolition process. In the latter stages the ROV's were used to lay explosive charges and wire them ready for initiation. A rugged ROV that has the capability to be integrated into CBRN and X-ray equipment.
  • Edge Guard

    Edge Guard

    Lyon Work and Rescue

    The Lyon EDGE GUARD stainless steel edge protectors are part of a family of rope and edge management systems.
  • RESTUBE Lifeguard

    RESTUBE Lifeguard

    Lyon Work and Rescue

    The Lifeguard RESTUBE is specifically designed for professional rescue use, or for additional personal self-protection for rescuers, and has been developed in co-operation with the SLRG (Swiss lifeguards), divisions of the Wasserwacht (German Red Cross – Water Safety & Rescue) and DLRG (German Lifesaving Association). Restube is currently being used and tested by Lifeguard associations around the world.
  • Nordic Pocket Saw

    Nordic Pocket Saw

    Lyon Work and Rescue

    USAR, flood and disaster relief operations frequently require removal of timber debris and fallen trees to gain access to or release trapped persons. Using powered chainsaws is quick and efficient, but is noisy, generates hazardous fumes and requires the skilled operator to be very close to the cut zone. Where delicate removal of timber up to 15cm in diameter is needed the NORDIC POCKET SAW may be an answer. Issued to a number of Military Forces, the NORDIC POCKET SAW is a Scandinavian designed hand powered chainsaw that provides a compact, lightweight and highly effective alternative where petrol or electric saws create additional issues. Made of 65Mn heat treated carbon steel, the 65cm long chainsaw blade is specially designed for hand powered applications, with easily sharpened double cutter teeth on each link to provide a smooth and effective cutting action in both directions. The two broad webbing handles allow a stable grip even with gloves and help keep the overall weight and packed size of the POCKET SAW to a minimum. Where remote cutting is required, the handles can be easily extended by use of cord or rope The entire saw including the durable nylon case packs down to 10 x 12 x 4cm and only weighs 122 grams, making it ideal for inclusion in technical rescue kits or as personal issue.
  • Petzl Boreo Helmet

    Petzl Boreo Helmet

    Lyon Work and Rescue

    The new Petzl BOREO is a helmet ideally suited for mountain rescue activities. Designed from the outset to be durable and very versatile, The BOREO uses Petzl’s latest hybrid construction to create a helmet that is both compact and head-covering. A rugged ABS outer shell resists impact, scratches and gouging as well as spreading any impact force over a larger area, whilst the innovative inner EPP foam liner with EPS foam insert gives enhanced impact protection and energy absorption. This construction as well as providing superb performance also enables the helmet to sit lower on the head, noticeably increasing comfort and stability. The head-covering shape, lower at the back and rear quarters, provides reinforced protection against lateral, frontal and rear impact, earning it Petzl’s TOP AND SIDE PROTECTION product labelling. To ensure maximum versatility, the BOREO has four clips for standard headlamp attachment and two holes compatible with the VIZION eye shield. It also can be fitted with the accessory PRO ADAPT mounts for the 2018 model Petzl DUO performance lighting or the PIXADAPT mount for the popular PIXA compact, rugged headlamps. The BOREO is available in two sizes (S/M or M/L) and four colours. Lyon Equipment Limited offer bespoke mountain rescue branding (including reflective panels)for the BOREO in line with current MREW and SMR team layouts.
  • Pocket Pump TOUCH

    Pocket Pump TOUCH

    SKC Limited

    The new Pocket Pump TOUCH continues with the touch screen concept that has proven to be a winner in our market. SKC TOUCH pumps offer the features important to our customers -- ease of use, small size, power, run time, and durability. It is CE marked, RoHS compliant and ATEX certified for potentially explosive gas atmospheres.
  • Emergency Incident Tabards
    In an emergency response situation, team identification is critical. Being able to quickly and accurately identify team leaders dramatically enhances the effectiveness of any team dealing with emergency or disaster control situations. Made with the Jesip Guidelines. Part of a range Incident Tabards Bespoke service available.
  • Dog Deterrent Sprays
    Drawing on many years of operational experience with military police and government agencies around the world Advanced K9 Solutions decided to produce a commercial dog attack deterrent spray. First Strike K9 Spray complies with all current legislation - for further details contact us by email sales@mcproducts.co.uk
  • Medic Vests
    The Original Med-Vest 1 was launched at the 2010 Emergency Services Show. As with all our products we improved it and brought the price down. A utility vest that can be worn for all duties, this medical vest now comes complete with an adjustable shoulder plate. This allows you to fully adjust the vest for complete comfort.
  • Enforcement and Security Vests
    The Protec Navy Enforcement / Parking and Security vests are manufactured to high standards and materials with design being a major factor to help spread the weight of today’s essential equipment evenly across the body which helps to reduce the stress and pain from using utility belts by MC Products UK Ltd, for further details email sales@mcproducts.co.uk
  • Blastsax
    The pioneering sandless sandbags, which have undergone extensive trials with the British armed forces, can save lives by mitigating explosions and fragmentation. They are transformed from being as light as a pillowcase to more effective than sandbags in minutes. Easy and space-saving to store in warehouses or on vehicles, BlastSax weigh just 700 grammes before being activated by simply adding water and then they become taut, weighing 20kg (44lbs) in around 3 minutes. BlastSax have been shown to be more effective than sandbags at capturing fragments One person can carry 40 BlastSax at one time in dry state – equal to 800kgs sandbag weight - and they can be used with aqueous decontaminants to neutralise CBRN threats. They are ideal for conventional demolition and personnel protection of possible explosive devices
  • February issue of EST

    February issue of EST

    Emergency Services Times

    Emergency Services Times February issue is now online http://bit.ly/est0218
  • Station Wear
  • Rescue Boat Operator
    This two day residential Rescue Boat Operator course provides basic training to any personnel who may be required to operate a rescue boat on flat or slow moving water. Clothing: Plas Menai will provide you with all necessary clothing including drysuits, boots, buoyancy aids and helmets for the duration of your course. Key learning points: Launching and recovery, dynamic risk assessment, scope of operations, pre and post trip checks, boat handling under power and with paddles, anchoring, towing, casualty pick up, casualty management, man overboard and recovery and boat maintenance.
  • Swiftwater Flood Rescue Technician
    This four day residential Swiftwater Flood Rescue Technician (SRT) course is the benchmark training course for emergency service and rescue teams, and is intended for those who may be required to carry out rescues in a swiftwater or flood environment. The course is Defra module 3 compliant. Clothing: Plas Menai will provide you with all necessary clothing including drysuits, boots, buoyancy aids and helmets for the duration of your course, but please bring with you plenty of warm clothing, including hats and gloves. Key learning points: Hydrology, hazard identification & risk assessment, introduction to rope systems, swimming in moving water, medical considerations, basic boat handling, scene management, crossing techniques and search operations
  • Swiftwater Flood Rescue Boat Operator
    The Swiftwater and Flood Rescue Boat Operator training course is intended for emergency services or rescue teams who are required to carry out rescues in a swiftwater or flood environment. The course develops your capability for handling boats on fast moving rivers and in flash flood conditions, whilst considering at all times self-protection and the application of low to risk high solutions in dealing with developing emergency situations. Clothing: Plas Menai will provide you with all necessary clothing including drysuits, boots, buoyancy aids and helmets for the duration of your course, but please bring with you plenty of warm clothing, including hats and gloves. Key learning points: Launching and recovery, dynamic risk assessment, scope of operations, pre and post trip checks, boat handling under power and with paddles, anchoring, towing, casualty pick up, casualty management, man overboard and recovery and boat maintenance.
  • Corporate Events & Team Building
    Nestled between the mountains and the sea, Plas Menai is a unique venue and fantastic destination for your next team building away day, facilitated meeting or corporate event. Whether you are looking to test your team, reward them for a job well done, or mix a meeting and some activity, with various-sized meeting rooms, a full catering service, leisure facilities, accommodation and a host of adventure activities available, we can create a truly dynamic event specifically for you.
  • Conference Facilities
    Having the magnificent Snowdonia mountain range as a backdrop and the Menai Strait as the outlook, Plas Menai is an inspirational venue for holding conferences, meetings, events and teambuilding programmes. We have a variety of meeting rooms and classrooms available including a video conference suite. All meeting rooms have integrated audio visual systems that can connect directly to laptops & tablets. Our largest room can accommodate up to 100 people theatre style. We provide exceptional catering services, offering a choice of light refreshments, buffets, lunches and cooked meals to suit all budgets and all special dietary requirements are catered for.
  • The NEW Lowa R-6 GORE-TEX®
    Robust and hardwearing yet also lightweight and flexible, these boots have been EN ISO 20347: 2012 certified and are recognised as occupational footwear. This means that the LOWA R-6 GTX® provides some degree of anti-static protection, shock absorption, and resistance to damage from oil, water and penetrative forces.
  • The NEW Lowa Renegade II GORE-TEX®
    With its high-quality full-grain leather, the RENEGADE II GTX® MID TF offers optimal protection. Manufactured in Europe, the boot features a waterproof and breathable GORE-TEX® lining that keeps feet dry and comfortable at all times.
  • The LOWA Wolf Grey Boot Range
    Selected Lowa boots in a new wolf grey colour scheme aimed at Counter Terrorism Police in Europe.
  • International Fire Fighter magazine
    International Fire Fighter is the leading global publication for municipal and industrial fire fighters and the fire and rescue industry. The editorial features are written by industry experts and comprise a unique blend focussing on the latest technology, training methods and equipment as well as highlighting sector specific issues from around the world. Regular product and company profiles, events updates and news make International Fire Fighter the first choice read for fire and rescue professionals.
  • Attack 100 Pro Fire Nozzle
    We believe this to be a ‘Best in Class’ nozzle, a view endorsed by the increasing number of devotees across leading Municipal and Industrial Fire Services around the globe including some of the world’s largest Fire Authorities.
  • Attack 500 Pro Fire Nozzle
    The Attack 500 Pro Series Fire Nozzle is designed for use with low pressure mainline hoses providing exceptional performance and long-term value for money. Manufactured in the UK to exacting standards under an ISO9001 Quality Management System the Attack 500 Pro represents the very best in front-line professional fire fighting nozzles.
  • H500ST Fire Nozzle

    H500ST Fire Nozzle

    Simon Lister

    The Delta H500ST has been the UK’s No. 1 hose reel branch for UK Fire Services for many years and brings together all the well-known attributes of the original H500 with the addition of stainless steel spinning turbine teeth that chops the water-stream into small droplets allowing the fog pattern to hang in the air longer enabling highly effective cooling and firefighter protection acting as a heat shield.
  • DM600 Fire Nozzle

    DM600 Fire Nozzle

    Simon Lister

    The Delta DM600 combines smooth slide-valve automatic functionality with exceptional performance for a low-pressure mainline nozzle. With six easily selectable ‘click’ positions providing flows from 75 to 685 litres per minute at 7 bar the operator can achieve exacting flows tailored to meet the specific risk. An incredibly versatile nozzle, the DM600 is perfectly suited to a broad range of firefighting operations and provides the very best in durability and long-term value for money.
  • HV-Series Foam Branchpipes
    The Delta HV-Series of Foam Branchpipes have been designed for use with all foam types including Fluoroproteins, AFFF’s, FFFP’s and All-Purpose Alcohol Resistant foams. Designed to first expand and then accelerate the foam to high velocity the HV-Series is capable of long throws beyond the range of many older designs.
279 Results